blog:2025:01:14:2025-01-14_-_3d_printing_and_tool_changing [BaSzErr]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== 2025-01-14 3D printing and tool changing ======

this summer i built a new 3D printer -- [[https://vorondesign.com/voron2.4|Voron 2.4]]. TL;DR -- it's a blast! :D i mean both the building process and using it. :) when i selected Voron 2.4 as my next 3D printer, the only real alternative i was considering was [[https://www.prusa3d.com/en/product/original-prusa-xl-assembled-5-toolhead-3d-printer/|Prusa XL]]. i must say i had a hard time picking one, but eventually, with price and open-sourceness factored in, i decided to go with Voron 2.4.

there is however one thing that i am missing -- multi-material capabilities. to be more precise -- a tool changer. there are multiple reasons for me to care, namely:

  - [[https://www.youtube.com/watch?v=5VV2fbJ0apg|multi-material supports]]
  - mechanically combining TPU into prints in different materials
  - ease of switching between different materials (my typical set involves: PLA, PET-G, ASA and TPU)

the 1st point is the most relevant for me here. linked video is a good start to get you interested. there's far more good tips in [[https://open.spotify.com/show/6eS71dp2ZhoeCoOufwTc0o|3D printing today]] podcast (which i HIGHLY recommend, btw!).


===== Voron 2.4 Tapchanger =====

there's however still a good option out there -- [[https://github.com/viesturz/tapchanger|Voron 2.4 Tapchanger]], the tool changer for Voron 2.4. that looks awesome! my excitement went through the roof... until i realized there's a catch in my case... my existing Voron 2.4 barely fits on my table -- there's maybe 10cm of free space above it. yet tool changer needs some more space than i can afford at the moment. :(

{{:blog:2025:01:14:voron_tapchanger.jpg?400|Voron 2.4 with Tapchanger - photo from the official project's github account}}

atm i do not see how i could address this issue. there's just not enough space in my room. i've already needed to scrap my old 3D printer, to even put Voron here. guess i'm out of luck for now. :/

blog/2025/01/14/2025-01-14_-_3d_printing_and_tool_changing.txt · Last modified: 2025/01/14 08:01 by basz

Back to top